Slackware 14.0 RC 5 available

In what will (hopefully) be the final development release before 14.0 ships.

Patrick’s comments from the changelog:

Wed Sep 19 23:52:16 UTC 2012
Here we go one more time with Slackware 14.0 release candidate 5.
Really, this time it is not a drill! Everything is in place and
ready to release at this point, and unless there’s some kind of
showstopper found (which doesn’t seem too likely after all the
testing that’s happened), the release can be expected soon.
After careful consideration and a considerable amount of internal
testing I did relent to give the kernel one more bump to 3.2.29,
so of course 3.2.30 was released a couple of hours ago. ;-)
But that’s not a showstopper, and it seems to be time to get off
the never-ending kernel upgrade treadmill until the next cycle
begins. Speaking of kernels, I added sample .configs for all the
3.x kernel branches in /testing. So test away, and if there are
any new problems (or old ones that we missed), let us know soon!

For those with income to throw around, consider helping keep Slack alive by donating or buying a t-shirt or something.

We’re a mirror!

After 15 years of learning and loving Slackware, I am happy to announce that I finally have the resources to be able to give back.

Slackblog is finally an official Slackware mirror!

If you are on the East coast, please do not hesitate to use us directly [http].

Alternately you can use Slackware’s MirrorBrain server which will transparently re-direct you to the closest mirror.

Script to keep Slackware up to date with slackpkg

# script for keeping your slackware installation up to date with slackpkg

echo -e "Preparing to update your Slackware installation with slackpkg."
echo -e "Do you have a mirror selected for slackpkg to use? [Y/n]: \c"
read -n1 x

case $x
  y|Y|'') cat /etc/slackpkg/blacklist
          echo -e "Do you need to edit /etc/slackpkg/blacklist? [y/N]: \c"
          read -n1 x
          case $x
            n|N|'') echo "Running 'slackpkg update'";;
            y|Y|*) $EDITOR /etc/slackpkg/blacklist;;
  n|N|*)  slackpkg update gpg
          $EDITOR /etc/slackpkg/mirrors;;
slackpkg update

echo -e "Did the above execute successfully? [Y/n]: \c"
read -n1 x

case $x
  y|Y|'') echo -e "Great. Now we're going to run slackpkg install-new.."
          sleep 2
          slackpkg install-new;;
  n|N|*)  echo -e "Fnord! Come back when it's fixed."

echo -e "Did the above execute successfully? [Y/n]: \c"
read -n1 x

case $x
  y|Y|'') echo -e "Great! Now we're going to run slackpkg upgrade-all.."
          sleep 2
          slackpkg upgrade-all;;
  n|N|*)  echo -e "Fnord! Come back when it's fixed."

echo -e "Did the above execute successfully? [Y/n]: \c"
read -n1 x
case $x
  y|Y|'') echo -e "All done. Thanks for playing!";;
  n|N|*)  echo -e "Fnord! Come back when it's fixed."

HOWTO: Installing Slackware [armedslack slackwarearm] on the Raspberry Pi

David Spencer over at The Daves Collective has graciously provided an installer image for running armedslack slackwarearm on the Raspberry Pi.

Extrapolated from his instructions, here is a quick install guide:

1. Get the latest installer image here.

(As of this update, I am experiencing a hanging rainbow video output with the latest installer image [raspi-slack-installer_01Aug12.img.xz]. I’m betting that it’s a firmware issue on my end (when I wrote this originally I was running an out-of-the-box Model B,) but haven’t had the time to test.

Fortunately the previous release from July works. If you are having the same problem, try upgrading your firmware first if possible. If not, I’m keeping a copy of the installer hosted for posterity, as it no longer exists at The Daves Collective.)

2. Get armedslack slackwarearm. I like to keep a -current copy (~2.9G) in /usr/local/src with rsync:

rsync --exclude '*/source/*' --delete -Pavv /usr/local/src/

3. Write the installer image to your SD card where [device] is your SD card writer.
(Take a look at dmesg if you are not sure. You may also run `tail -f /var/log/messages` and then plug in your SD writer.)

xz -dc raspi-slack-installer_01Aug12.img.xz | dd of=[device] bs=65536

4. Boot your Pi with the SD card and set the date with ntpdate. You’ll need to run ‘network’ or dhcpcd first.
*Failure to do so will result in all file modification dates being set to the unix epoch, as the Pi has no onboard RTC.


Alternately, if you don’t have an internet connection you may also use date:

date MMDDhhmmYYYY

5. Re-partition the card with cfdisk or fdisk. If your SD card is larger than default 2gb, you’ll want to delete and recreate the root partition:

fdisk /dev/mmcblk0
root@pi:/# fdisk /dev/mmcblk0
Welcome to fdisk (util-linux 2.21.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Command (m for help): p

Disk /dev/mmcblk0: 15.9 GB, 15931539456 bytes
4 heads, 32 sectors/track, 243096 cylinders, total 31116288 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00007091

Device Boot Start End Blocks Id System
/dev/mmcblk0p1 32 97663 48816 c W95 FAT32 (LBA)
/dev/mmcblk0p2 97664 878847 390592 82 Linux swap
/dev/mmcblk0p3 878848 3839999 1480576 83 Linux

Command (m for help): d
Partition number (1-4): 3

Command (m for help): n
Command action
e extended
p primary partition (1-4)
Partition number (1-4, default 3): 3
First sector (878848-31116287, default 880640):
Using default value 880640
Last sector, +sectors or +size{K,M,G} (880640-31116287, default 31116287):
Using default value 31116287
Partition 3 of type Linux and of size 14.4 GiB is set

Command (m for help): w
The partition table has been altered!

Syncing disks.

6. Run setup and install Slackware as usual. Do not reboot when done.


7. If you have done a full install, as per Dave’s suggestion, remove the other kernels with:

ROOT=/mnt removepkg \
kernel_kirkwood kernel-modules-kirkwood \
kernel_tegra kernel-modules-tegra \
kernel_versatile kernel-modules-versatile

8. Install the kernel and other packages by running:

mount -t vfat /dev/mmcblk0p1 /mnt/boot
ROOT=/mnt installpkg /raspi-extra/kernel* /raspi-extra/raspi*

9. Get rpi-update and upgrade your firmware, if you haven’t already.

cd /mnt/usr/local/src
git clone ./rpi-update
touch /boot/start.elf
cd rpi-update
sh ./rpi-update

10. Optionally, upgrade your kernel. You’ll need to mount /dev/mmcblk0p1 to /boot first. Detailed instructions are here.

mount /dev/mmcblk0p1 /boot -t vfat
cd /usr/local/src/
mkdir raspberrypi
cd raspberrypi
git clone --depth 1 git://
cd linux
zcat /proc/config.gz > .config
make menuconfig # optional
time make
time make modules
# 5-11 hours later..
cp arch/arm/boot/Image /boot/kernel.img
make ARCH=arm modules_install INSTALL_MOD_PATH=/